1-TIRES & ALIGNMENT
We examine tire pressure, making sure the recommended tire pressure is set according to the specifications set by your vehicle’s manufacturer. We perform a thorough visual inspection of your tires, paying close attention to the depth of the tread and the tire wear patterns. Uneven tire wear could be a sign of a misalignment which could reduce the life of your tires and decrease fuel efficiency. We also make sure the tread depth of your tires has not fallen below the recommended levels. The amount of tread on your tires has a direct impact on the stopping distance of your vehicle. We make sure your car is set to provide the best performance when you are on the road.
During a Complete Vehicle Inspection, we will inspect the following tire and wheel alignment components.
- Tire Pressure Check
- Tire Tread Depth
- Inspect for Illuminated TPMS Light
- Signs of a Misalignment
2-EXHAUST SYSTEM
We check for vehicle noises such as popping, hissing or excessive loudness, all of which could indicate leaks at the exhaust manifold, muffler, tailpipe, a punctured catalytic converter, or other problems with the exhaust system.
- Exhaust Manifold
- Oxygen Sensor
- Exhaust Pipe
- Tailpipe and Muffler
3-STEERING & SUSPENSION
We check for suspension-related issues, including loose steering parts, damaged shocks or struts, broken or worn out mounts or bushings, and vehicle swaying or bouncing.
- U-Joint
- Idler/Pitman Arm
- Center Link
- Bushings
- Tie Rod Ends
- Ball Joints
- Shocks/Struts
4-BRAKES
Can’t forget about one of your vehicle’s most important safety features, your brakes! During a Complete Vehicle Inspection, we’ll examine the condition of your braking system and watch for any common brake problems like grinding, squeaking, shaking steering wheel while braking, and spongy brakes.
- Measure Brake Pad/Shoe Thickness
- Measure Brake Rotor Thickness
- Measure Brake Drum Diameter
- Brake Hoses
- Parking Brake System
- Other Braking Components including Hardware, Calipers, Wheel Cylinders, and ABS
- Brake Fluid
5-GENERAL MAINTENANCE
This last section includes all the little things that you may not think about on a daily basis. In addition to the maintenance items that we inspect during our Courtesy Check, we will perform a visual inspection of the following components.
- Belt Tensioner
- Valve Cover Gasket
- Power Steering Hoses
- Windshield Washer Fluid Top-Off
- Start/Charge Test
- Spark Plug Scheduled Maintenance
- Fuel Filter
- Fuel System
- Ignition Wires
- Power Steering Hoses
- Timing Belt
- Exhaust System Check
Resources: www.firestonecompleteautocare.com
